BURKERT Type 8652 AirLINE valve island (SKU 20097981) has been especially developed for process automation requirements. New diagnostic functions can be visualised on the LC display, both in clear text as well as symbols. This makes it easy to relate to the shown messages and helps to save time during start-up and maintenance. Furthermore, the diagnostic message is also available at the controller, enabling a fast overview of the plant status.

The hardware is optimised for installation at the bottom of the control cabinet. Installation on a standard rail is also possible. Key pneumatic functions ensure increased process reliability. For instance, check valves in the exhaust air ducts make sure there is no unplanned actuation due to pressure peaks.

General Technical Data

Property	Value
Number of valve slots	12 PCE
Protocol	PROFIBUS DPV1
Body Material	PA (polyamide)
Seal Material	NBR and PUR
Width per station	11 mm
Pressure range	-1 to 10 bar
External supply air	3 to 10 bar
Temperature medium	-10 °C to 55 °C
Ambient temperature	-10 °C to 55 °C
Operating voltage	24 V DC (±10% tolerance)
Nominal power per valve	0.7 W (0.175 W after power reduction)
Degree of protection	IP20 (IP65 in closed control cabinets)
Air supply connection	D10, Brass
Working port	D6, Brass

AirLINE Quick

AirLINE Quick considerably reduces the use of components in the control cabinet. With the AirLINE Quick Adapter, the valve terminal is adapted directly to the control cabinet floor or control cabinet wall.

Advantages:

• Reduced space requirement in the control cabinet
• Makes it possible to use more compact control cabinets
• Reduced installation effort due to hose connections directly at the bottom of the control cabinet

Circuit Functions

Circuit function	Description
C (CF C)	3/2-way solenoid valve, servo-controlled, normally closed
C (CF C)	2 × 3/2-way solenoid valve, servo-controlled, normally closed
D (CF D)	2 × 3/2-way solenoid valve, servo-controlled, normally open
H (CF H)	5/2-way solenoid valve, servo-controlled. Pressure applied via port (1), therefore one of the two ports (2) or (4) is under pressure.
L (CF L)	5/3-way solenoid valve, in middle position all ports locked
M (CF M)	5/3-way solenoid valve, servo-controlled, in middle position ports 2 and 4 ventilated
N (CF N)	5/3-way solenoid valve, in middle position ports 2 and 4 exhausted
Z (CF Z)	5/2-way solenoid valve, impulse variant with 2 coils

Approvals and Conformities

• Explosion protection: Optional category 3 device suitable for zone 2/22. ATEX: II 3G Ex ec IIC Gc / II 3D Ex tc IIIC Dc. IECEx: Ex ec IIC Gc / Ex tc IIIC Dc.
• North America (USA/Canada): Optional UL Listed (UL 61010-1) and UL Recognized for Hazardous Locations (Class I, Zone 2; Class II, Zone 22; Class I, Div 2).
• Others: China Compulsory Certification (CCC) optional for hazardous applications in China.

Dimensions (12-fold Variant)

Variant	A	B	C	m	n
12-fold	77	154	10 x M5	11	3

Product Connections

Power Supply

• Communication and displays: 5-pin spring-loaded terminal (Red: 24 V DC, Black: GND).
• Pneumatic valves: 2-pin spring-loaded terminal (Red: AUX 24 V, Black: GND).

Fieldbus Interface (PROFIBUS DPV1)

Pin	Assignment
1	SHIELDING
2	M24 (optional)
3	RxD/TxD-P (B-line)
4	CNTR-P (optional)
5	DGND
6	+5 V (supply for terminating resistor)
7	+24 V (optional)
8	RxD/TxD-N (A-line)
9	CNTR-N (optional)

Product Installation

WARNING

To use the Hot Swap function, always observe a minimum distance to the front edge of the control cabinet when installing the valve island inside the control cabinet.